Meridian 810 Betriebsanweisung PDF herunterladen (Seite 23)

Installing the 810

Projector

Installing the projector and screen

It is recommended that this projector be installed at

right angles to the screen. You can shift the projection

screen position vertically and horizontally with some

optional lenses available for this projector as shown

below. (See lens documentation)

When upward shift amount is up to

50% (Lens S only)

Install the projector so that the lower end of the

projection screen is at the same height as the centre of

the lens.

Screen

90 90 90

Centre line of lens

When there is no upward/downward

shift

Install the projector such that the center of the

projection screen is at the same height as the centre of

the lens.

Screen

90 90 90

Centre line of lens

When downward shift amount is up to

50% (Lens S only)

Install the projector such that the upper end of the

projection screen is at the same height as the centre of

the lens.

Screen

90 90 90

Centre line of lens

When shift amount to the right is up to

25% (Lens S only)

Install the projector such that the centre of the lens is

aligned with the Qr position from the left edge of the

screen.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 69 70

Keine Kommentare

Meridian 810 Betriebsanweisung Seite 23