Meridian 810 Betriebsanweisung PDF herunterladen (Seite 2)

Preface

Important safety instructions – 810 Projector

Important information

WARNING: TO PREVENT FIRE OR SHOCK

HAZARDS, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

WARNING: THIS APPARATUS MUST BE EARTHED.

CAUTION: To reduce the risk of electric shock, do

not remove cover. Refer servicing to qualified service

personnel.

This projector is equipped with a 3-pin grounding type

plug to satisfy FCC regulations. If you are unable to

insert the plug into the outlet, contact your electrician.

FCC information (USA only)

CAUTION: Unapproved changes or modifications

could void the user’s authority to operate the

equipment.

NOTE: This equipment has been tested and found

to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against

harmful interference when the equipment is operated in

a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the

instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference

in which case the user will be required to correct the

interference at his own expense. Unapproved changes

or modification could

Machine noise information (Germany

only)

Changes Machine Noise Information Ordinance 3.

GSGV, January 18, 1991: The sound pressure level

at the operator position is equal or less than 70 dB (A)

according to ISO 7779.

About the installation location

Do not install the projector in a place that cannot

support its weight securely.

If the mounting is not sturdy enough, the projector

could fall or overturn, possibly causing personal injury.

Important safeguards

Electrical energy can perform many useful functions.

This unit has been engineered and manufactured to

assure your personal safety. But IMPROPER USE CAN

RESULT IN POTENTIAL ELECTRICAL SHOCK OR

FIRE HAZARD. In order not to defeat the safeguards

incorporated into this product, observe the following

basic rules for its installation, use and service. Please

read these Important Safeguards carefully before use.

All the safety and operating instructions should be

read before the product is operated.

The safety and operating instructions should be

retained for future reference.

All warnings on the product and in the operating

instructions should be adhered to.

All operating instructions should be followed.

Place the projector near a wall outlet where the plug

can be easily unplugged.

Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

Do not use attachments not recommended by the

product manufacturer as they may be hazardous.

Do not use this product near water. Do not use

immediately after moving from a low temperature to

high temperature, as this causes condensation, which

may result in fire, electric shock, or other hazards.

Do not place this product on an unstable cart, stand,

or table. The product may fall, causing serious

injury to a child or adult, and serious damage to the

product. The product should be mounted according

to the manufacturer’s instructions, and should use a

mount recommended by the manufacturer.

•

1 2 3 4 5 6 7 ... 69 70

Kommentare zu diesen Handbüchern

Keine Kommentare

Meridian 810 Betriebsanweisung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren Meridian 810