Meridian 810 Betriebsanweisung PDF herunterladen (Seite 62)

Troubleshooting

Image problems

Image is dark

Is the lamp near exhaustion?

Check the Lamp Time indicator (see

Warnings

using indicator lights

, page 56) or displayed screen

message (see

On-screen display messages

, page

55). Obtain a replacement lamp from your Meridian

retailer or contact Meridian’s service department.

Video image does not appear

Is the lens cap removed?

Remove the lens cap.

Is the scaler properly connected?

Connect the scaler correctly.

Is the power to the connected devices turned on?

Turn on the power to the connected devices.

Are correct signals being output from the connected

devices?

Check that the source you are using has the correct

video input selected; DVI or HDMI.

Configure the connected devices correctly.

Are the signals of the connected devices within

operating range?

Check to ensure that they are valid input signals, and

input compatible signals accordingly.

Is the video image hidden?

Press the Hide button on the remote control.

Video image is blurred

Is the projector out of focus?

Adjust the focus using the Focus Lens setting on the

810 Scaler.

Is the projection distance too short or too long?

•

Set it to a correct distance. See the lens

documentation.

Colouring of the image is poor or

distorted

Are the signals of the connected devices valid input

signals?

Check to ensure that they are valid input signals, and

input compatible signals accordingly.

Is the input cable correctly connected?

Connect the input cable correctly.

Projection position on the screen has

shifted

Has the setup position of the projector been shifted?

Check the setup position of the projector.

Image disappears suddenly

Are the video signals correctly input?

Check the signals and connection.

The screen does not darken

immediately when the projection has

ended

The shutdown process is in progress

Please wait for an addition 10 seconds for the

shutdown process to complete

The quadrants of the image are in the

wrong positions

Check that the Quad DVI cables between the Scaler

and Projector and connected correctly.

•

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 68 69 70

Kommentare zu diesen Handbüchern

Keine Kommentare

Meridian 810 Betriebsanweisung Seite 62

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren Meridian 810