Meridian 810 Betriebsanweisung PDF herunterladen (Seite 18)

Installing the 810

Projector

Names and functions of parts

Front air inlet/filter

The air inlets absorb air to cool the interior of the

projector. A filter is mounted inside the projector to

remove dirt in the air that enters through the inlets.

Clean the filter regularly (see

Cleaning and replacing the

filters

, page 48).

CAUTION: Do not block the air inlets with papers,

cloth, or soft cushions. Doing so may cause heat

to build up inside the projector and result in fire or

malfunction.

Lens cap

Fit the cap on the lens when this projector is not in use

to prevent the lens from becoming dirty.

CAUTION: Do not project images with the lens cap

attached. The lens cap may be deformed due to the

heat, or the projector may malfunction.

Lens

(Several lens options are available for this projector.)

Remove the lens cap before projection.

Adjustable feet (x 4)

Adjust the feet until the projector is level. The

adjustable range is 20 mm for each. See

Adjusting the

inclination

, page 14.

Side air inlet/filter

The air inlets absorb air to cool the interior of the

projector. A filter is mounted inside the projector to

remove dirt in the air that enters through the inlets.

Clean the filter regularly (see

Cleaning and replacing the

filters

, page 48).

Front/Right Side

Front air inlet/filter

Intake air

Lens cap Lens Adjustable

feet

Side air

inlet/filter

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 69 70

Kommentare zu diesen Handbüchern

Keine Kommentare

Meridian 810 Betriebsanweisung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren Meridian 810