Meridian 810 Betriebsanweisung PDF herunterladen (Seite 6)

Preface

Important safety instructions – 810 Scaler

Read the instructions.

Keep these instructions.

Follow all instructions.

Do not use this apparatus near water.

Clean only with a dry cloth.

Install only in accordance with the manufacturer’s

instructions.

Refer all servicing to approved service personnel.

Do not disassemble – no user-servicable parts inside.

This apparatus has been designed with Class 1

construction and must be connected to a mains socket

outlet with a protective earthing connection (the third

grounding pin).

The apparatus may be isolated from mains power either

by unplugging the power connector from the rear of the

unit, or by unplugging the connector at the opposing

end of the power cord or cable from its supply outlet.

As a result, either or both of these connectors should

remain accessible.

Safety warnings

WARNING: TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

Do not expose the unit to dripping or splashing.

Do not place any object filled with liquid, such as a

vase, on the unit.

Do not place naked flame sources, such as lighted

candles, on the unit.

•

To avoid overheating

Leave at least 10cm around the equipment to ensure

sufficient ventilation.

Do not position the unit:

In direct sunlight.

Near heat sources, such as a radiator.

Directly on top of heat producing equipment, such as

a power amplifier.

On a soft surface, such as a carpet, which would

obstruct the ventilation holes in the base.

To avoid interference

Do not position the unit:

Near strong electrical or magnetic radiation, such as

near a power amplifier.

Radio interference

FCC Warning: This equipment generates and can

radiate radio frequency energy and if not installed and

used correctly in accordance with our instructions may

cause interference to radio communications or radio

and television reception. It has been type-tested and

complies with the limits set out in Subpart J, Part 15 of

FCC rules for a Class B computing device. These limits

are intended to provide reasonable protection against

such interference in home installations.

EEC: This product has been designed and type-tested

to comply with the limits set out in EN55013 and

EN55020.

•

1 2 3 4 5 6 7 8 9 10 11 ... 69 70

Kommentare zu diesen Handbüchern

Keine Kommentare

Meridian 810 Betriebsanweisung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren Meridian 810