Meridian 810 Betriebsanweisung Seite 19

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 70
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 18
11
Installing the 810
Projector
Digital in [DVI 1 to 4]
These are the input terminal for video signals. Connect
to the video output terminals of the 810 scaler.
Vent hole
Warm air exits from the hole after cooling the projector.
CAUTION: Do not block the vent holes. Doing so may
cause heat to trap inside the projector and result in fire
or malfunction.
Vent hole (for lamp)
Warm air exits from the hole after cooling the lamp.
Power switch
Use this to turn ON/OFF the main power supply of the
projector unit.
Power input
Connect the supplied cord to this terminal.
Operate indicator
Gives the following information:
Indicator Description
Lit (Red) Standby mode.
Lit (Green) Power is supplied.
Blinking (Red) In cooling (cool down) mode.
Blinking (Green) The projected image is temporarily
hidden.
For details on indicator displays during warnings, refer
to
Warnings using indicator lights
, page 56.
Lamp indicator
This indicator lights up when the lamp time exceeds
1400 hours. You may wish to arrange for this light to
be visible.
For details on indicator displays during warnings, refer
to
Warnings using indicator lights
, page 56.
A lamp life message appears on screen when the lamp
time has exceeded 1500 hours.
Rear
OPERATE I/B
DVI 3
USB
LAN
RS-232C
STANDBY/ON
CONTROL
LAMP
WARNING
DVI 4
DVI 1
DVI 2
Exhaust air
USB
Ethernet
RS232
Operate
button
Warning
indicator
Lamp
indicator
Operate
indicator
Digital
in
Vent
hole
Vent hole
(for lamp)
Power
switch
Power
input
Seitenansicht 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 69 70

Kommentare zu diesen Handbüchern

Keine Kommentare