Meridian 541 Spezifikationen PDF herunterladen (Seite 48)

Calibrating the loudspeakers

Using the calibration procedure

As you run the calibration procedure the name of each

loudspeaker is shown on the front panel display. The on-screen

display also provides additional text explaining what to do, and

sample displays are reproduced in the following sections for

reference. For information about setting up the on-screen

display see On-screen display, page 30.

Using a Sound Pressure Level meter

Although you can perform the calibration procedure by ear, it is

recommended that you perform the tests using a Sound

Pressure Level meter, available fairly cheaply from Tandy/Radio

Shack, or your Meridian dealer may be able to lend you one.

Set the Sound Pressure Level meter to C weighted, and slow.

Take readings from the listening position, holding the meter

vertical at head height.

To start the calibration procedure

● Put the surround controller into standby by pressing the Off

key.

● Press and hold the front panel Off key for at least five

seconds.

The display shows:

Calibration

The on-screen display shows:

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 71 72

Keine Kommentare

Meridian 541 Spezifikationen Seite 48