Meridian 541 Spezifikationen PDF herunterladen (Seite 43)

Configuring the surround controller

To select a standard setting

Warning! Selecting Type will reset the 541 Surround Controller

to one of a standard set of configurations. If you want to make

changes to the configuration of an existing system use Config;

see Specifying information about your system on the next page.

With Config you can alter any Type to match any system.

● Switch off any power amplifiers that are connected to the

surround controller.

● Switch off the surround controller, using the power switch on

the back panel.

● Switch on the power again while holding down the Off key on

the front panel.

The display will show:

Type

followed by:

Type 1

● Press A or V on the front panel to change the Type number.

For example, to select Type 3 for use

with a phono module the display shows:

Type 3 LP

● Wait for one second, and then switch off the surround

controller using the power switch on the back panel.

● Switch on again to use the standard settings you have

selected.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 71 72

Keine Kommentare

Meridian 541 Spezifikationen Seite 43