Meridian G68 Installationsanleitung PDF herunterladen (Seite 12)

I n s t a l l i n g t h e

d i g i t a l s u r r o u n d

c o n t r o l l e r

To connect to a computer via USB

Computer

USB

USB A-B CABLE

G68 Digital Surround Controller

USB INPUT

You can connect a Windows PC or Macintosh to the G68 via the

USB input to allow you to use the G68 as a digital audio output

device.

On a PC, Windows XP/SP2 or later is required. On a Macintosh,

OSX 10.4 or later is recommended. Linux computers that support

USB audio class drivers can also be used.

• Connect the computer’s USB port to USB INPUT U1 on the G68

using a standard USB A-B cable. The flat rectangular end plugs

into the PC and the square end into the G68.

The first time that the G68 is plugged in to the PC or Macintosh

it will automatically be recognised, and appropriate drivers will be

installed. The G68 will then appear as a sound output device called

Meridian 48k/16 in the Sound control panel (PC) or Sound

system preferences panel (Macintosh).

Note: The computer volume control will have no effect on the

playback volume; use the Meridian system control instead.

To connect to a DVD-Audio player with digital multichannel outputs (eg G98DH DVD Audio Transport)

G98DH DVD Audio Transport

3 x DIGITAL LEADS

COMMS LEAD

G68 Digital Surround Controller

MULTI DIG IN 1

(DVD)

COMMSCOMMS

MAIN DIGITAL OUT

The G68 Digital Surround Controller provides 12 digital coax inputs,

six of which can be used as two multichannel inputs from a source

with a suitable digital multichannel output, such as the G98DH

DVD Player.

• Connect the MAIN DIGITAL OUT on the G98DH to the MULTI DIG

IN 1 on the G68, using three 75Ω screened coax phono leads.

• Connect together the COMMS sockets using the Comms lead

provided.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 71 72

Keine Kommentare

Meridian G68 Installationsanleitung Seite 12