Meridian 588 Betriebsanweisung PDF herunterladen (Seite 27)

Setting up the compact disc player

To connect to other Meridian 500

Series equipment

● Connect one of the COMMS sockets on the back panel of the

compact disc player to one of the COMMS sockets on

another 500 Series unit, using the 500 comms lead provided.

The sequence in which you connect the units is not important.

588 CD Player 500 Series unit

COMMS COMMS

Then configure the units with the following automatic setup

procedure:

● Switch all the units to standby.

● Press Clear (remote).

Each unit will display:

Auto

One unit will then be designated

as the controller, and display:

Con.

This is the unit that will respond to the remote.

All the other units will be configured

as non-controllers, and display:

N.Con.

Your system is now set up and ready for use.

● If for any reason the automatic setup does not give the

configuration you want, restore the default operation by

selecting the standard type; see Choosing standard settings,

page 26.

Note: Do not, under any circumstances, connect any equipment

other than Meridian 500 or 800 Series to the socket marked

COMMS on the back of the compact disc player.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 40 41

Keine Kommentare

Meridian 588 Betriebsanweisung Seite 27